general data life expectancy minimum operations mechanical 1 x 10 8 at 3hz electrical 1 x 10 5 at 0.5 a, 125 vac, res. 2 x 10 5 at 1.0 a, 30 vdc, res. operate time 2 ms at nominal coil voltage (typical) release time (typical) 1 ms at nominal coil voltage (with no coil suppression) bounce (typical) at 10 ma contact current 1 ms at operate or release capacitance < 1 pf at 10 khz?open contacts < 1 pf at 10 khz?adjacent contact sets dielectric strength see table (at sea level) dropout greater than 10% of nominal coil voltage insulation resistance 10 9 ohms min. at 25c, 500 vdc, 50% rh ambient temperature at nominal coil voltage operating -40c (-40f) to 95c (203f) (3?12 vdc) storage -40c (-40f) to 90c (194f) (24 vdc) -40c (-40f) to 115c (239f) vibration operational, 20 g, 10?55 hz non-destructive, 30 g, 10?55 hz shock operational, 50 g min., 11 ms non-destructive, 100 g min., 11 ms max. solder temp. 350c (662f) for 3 seconds temp./time 260c (500f) for 10 seconds max. solvent temp. 80c (176f) max. immersion time 30 seconds weight 1.8 grams enclosure p.b.t. polyester terminals tinned copper alloy, p.c. az 3/14/01w AZ846 microminiature polarized relay features ? microminiature size: up to 50% less board area than previous generation telecom relays high dielectric and surge voltage: 2.5 kv surge (per bellcore ta ? nwt ? 001089) 1.5 kv surge (per fcc part 68) 1,000 vrms, open contacts low power consumption: 79 mw pickup stable contact resistance for low level signal switching epoxy sealed for automatic wave soldering and cleaning ul file e43203; csa file 700339 all plastics meet ul94 v ? o, 30 min. oxygen index contacts arrangement dpdt (2 form c) bifurcated crossbar contacts ratings resistive load: max. switched power: 60 w or 62.5 va max. switched current: 2.0 a max. switched voltage: 220 vdc or 250 vac rated load ul/csa 0.5 a at 125 vac 2.0 a at 30 vdc 0.3 a at 110 vdc material silver alloy; gold clad resistance < 100 milliohms initially at 6 v, 1 a coil (polarized) power at pickup voltage 79 mw (3 ? 12 vdc) (typical) 113 mw (24 vdc) max. continuous 1.0 w at 20 c (68 f) dissipation 0.78 w at 40 c (104 f) temperature rise at nominal coil voltage 18 c (32 f) (3 ? 12 vdc) 25 c (45 f) (24 vdc) temperature max. 115 c (239 f) notes 1. all values at 20 c (68 f). 2. relay may pull in with less than ? must operate ? value. 3. relay has fixed coil polarity. 4. specifications subject to change without notice.
relay ordering data standard relays nominal coil max. continuous coil resistance must operate order number vdc vdc 10% vdc 3 6.9 64 2.25 AZ846 ? 3 4.5 10.4 145 3.38 AZ846 ? 4 5 11.5 178 3.75 AZ846 ? 5 6 13.8 257 4.5 AZ846 ? 6 9 20.8 579 6.75 AZ846 ? 9 12 27.7 1,028 9.0 AZ846 ? 12 24 46.3 2,880 18.0 AZ846 ? 24 az 3/14/01w AZ846 initial dielectric strength (minimum) surge vrms, 1 min. peak (v) rise time (s) decay time* (9s) (1/2 peak) between open contacts 1,000 1,500 10 160 between contact sets 1,000 1,500 2 160 between coil and contacts 1,800 2,500 2 10 mechanical data maximum switching capacity * decay time measured from beginning of surge. dimensions in inches with metric equivalents in parentheses. tolerance: 0.010 ? .366 (9.2) .579 (14.7) .291 (7.4) .010 (0.26) .016 (0.4) .020 (0.5) .126 .016 (3.2) .100 (2.54) .200 (5.08) .041 (1.05) 8- ? .039 (8- ? 1.0) 345 10 9 8 1 12 wiring diagram pc board layout viewed toward terminals viewed toward terminals dc resistive load ac resistive load 200 100 0 0.1 0.3 0.5 1.0 2.0 30 contact voltage cont. current
|
